The 1000-series of machines are built in a heavy duty construction with a smaller footprint designed to accommodate a job shop with various applications such as deburring, dross removal, calibrating/dimensioning, edge radiusing or finishing.  This series of machine can be built in both top and bottom configurations.

MACHINE FEATURES

  • Machines built in widths from 13″ to 43″ and multiple head frames
  • Dual infeed and outfeed pinch rolls to ensure parts feed through machine properly
  • One- to three-head configurations with drum, brush, disc or combination drum/brush/disc heads
  • Machines built in both top and bottom configurations
  • Individual cam adjustment down to .001″ per head for accurate finishing
  • Air-loaded cylinder for automated belt tensioning
  • Automatic abrasive belt tracking to ensure proper belt alignment during operation

MACHINE SPECIFICATIONS

SPECIFICATION
DESCRIPTION
Belt Width
13″ to 43″
Motor Size
5 HP to 30 HP
Number of Heads
1 to 3
Types of Heads Available
Drum, Scotch-Brite, Brush and Disc
Drum Size
100 mm to 200 mm
Machine Configuration
Top-Only, Bottom-Only, or Top/Bottom Configuration
Feed Motor
1 HP to 3 HP

 

Contact an Applications Specialist

 

MACHINE VIDEOS

1037M-DSc With Sticky Belt and Conveyor System

Rust Removal, Deburring, and Edge Radius in a Single Pass of a Carbon Steel Part Using an Apex 37″ Belt/Disc Machine

1375M-DSc

Deburr and Edge Radius of Small Parts Using an Apex 13″ Wide Belt / Disc Machine Equipped with a Sticky Conveyor Belt and Cleaning System

1037M-DS

Sheet Metal Deburring of Laser Cut Holes and Cutouts With PVC Coating In Place