The 2000-Series of machines are built with heavier production requirements in mind. They are designed to run multiple shifts per day and handle such applications as deburring, slag grinding, calibrating/dimensioning, edge radiusing, paint/surface preparation, finishing/polishing or a combination of these applications. This series of machine can be built in both top and bottom configurations.

MACHINE FEATURES

  • Machines built in widths from 19″ to 52″ and multiple head frames
  • Dual infeed and outfeed pinch rolls to ensure parts feed through machine properly
  • One- to four-head configurations with drum, brush and disc heads or combination drum/brush/disc heads
  • Spray headers on both sides of sanding area to keep parts cool and belts clean during operation
  • Individual cam adjustment down to .001″ per head for accurate finishing
  • Paper media filtration system with automatic paper advance for ease of operation
  • Air-loaded cylinder for automated belt tensioning
  • Automatic abrasive belt tracking to ensure proper belt alignment during operation.

MACHINE SPECIFICATIONS

SPECIFICATION
DESCRIPTION
Belt Width
19″ to 52″
Motor Size
7.5 HP to 50 HP
Number of Heads
1 to 4
Types of Heads Available
Drum, Scotch-Brite, Brush and Disc
Drum Size
100 mm to 280 mm
Machine Configuration
Top-Only, Bottom-Only, or Top/Bottom Combination
Feed Motor
1 HP to 3 HP

 

Contact an Applications Specialist

 

MACHINE VIDEOS

2037MW-DDDD

This video demonstrates polishing stainless steel parts using an Apex Machine Group Model 2037MW-DDDD. This 4-head machine is equipped with four separate abrasive belt heads that allow for a #4 up to a mirror finish on stainless steel parts in a single pass.

2037MW-DSD

This video shows a stainless steel part with drilled holes being processed on a wet metalworking machine. The Apex Model 2037MW-DSD is a 3-head abrasive belt / rotating disc / abrasive belt deburring and finishing machine. It will remove the burrs and give edge radius if desired on aluminum, stainless steel, copper, titanium, carbon steel and other ferrous and non-ferrous metal materials.