We’re looking forward to FabTech 2018 – November 6-8, 2018 at the Georgia World Congress Center in Altlanta, GA. Come and visit us at Booth B8929 for a machine demo and to discuss your application needs!
This video demonstrates de-burring and edge radius on a laser cut aluminum part with a 1037M-DS belt / brush machine. Removes slag / dross then de-bur and edge radius part quickly and uniformly.
This video demonstrates laser cut & stamped aluminum and stainless steel parts run through a 2DD-1350 finishing machine. Edge radius, de-burring, non-directional graining and surface preparation prior to paint/powder coating or anodizing, 52″ wide machine with vacuum bed for securely holding small parts.
This video demonstrates a 4-head lineal sanding machine for sanding the top, left and right side of metal, plastic, composite or wood parts.
This video demonstrates brushing circular aluminum parts. Brush straight, flat or profiled parts, metal, composite, plastic or wood with a variety of grits for a wide range of grained finishes and de-burring applications.
This video demonstrates processing a part through the 1975MW-DDDD to de-bur, edge radius and put a #4 finish on the water-jet cut stainless steel part. De-bur and edge radius inside and outside profiles.
This video demonstrates painted extrusion being scuffed for optimal coating adhesion by SlipCon machine.
This video demonstrates a laser cut stainless steel part with interior holes run through a 37″ wide belt / brush sander to de-bur and edge radius part in a single pass.
This videos demonstrates the usage of a 52″ belt / disc / disc / belt machine de-burring stamped gauge aluminum parts with 4th head not engaged.
This video demonstrates the usage of a 52″ belt /disc / disc / belt metal finishing machine for slag / dross removal, edge radius, de-burring and re-graining on a variety of metals.
This video demonstrates the usage of a 52″ belt / disc / disc / belt machine de-burring and edge radius stamped gauge aluminum parts. De-burring interior holes and exterior profiles in a single pass with 100% consistency. Lower the 4th widebelt station to re-grain part.
This video demonstrates processing small laser cut brass part to de-bur and edge radius with13″ belt / disc machine. Process very small parts of plastic, composite or any type of metal.
This video demonstrates the usage of a 13″ belt / disc machine for slag / dross removal, de-burring, edge radius and graining metals. Run parts as small as 5mm x 5mm.
This video demonstrates a Water-jet cut aluminum part, de-bur & edge radius in a single pass with 13″ belt & disc.
This video demonstrates a stamped copper part run through a 37″ wide belt / brush sander to de-bur and edge radius part in a single pass.